LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2145 (Manual Air Conditioner) >> Intake Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box assembly. Refer to "GLOVE BOX ".
  2. Remove the screws (A) and the center lower trim (1).
  3. Remove the center stack lower trim RH.
  4. Disconnect the intake sensor electrical connector.
  5. Twist and pull the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.
scientia non olet · About LEMON Manuals