LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2063 (Brake System) >> Front Disc Brake >> Disassembly and Assembly of Caliper Assembly >> Inspection After Disassembly >> Cylinder Body

Cylinder Body

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Use new brake fluid to clean. Never use mineral oils such as gasoline or kerosene.
  • Check for corrosion, wear, or damage to the cylinder inner wall, and replace the caliper if there are any non-standard conditions.
  • Minor flaws caused by corrosion or a foreign material can be removed by polishing the surface with a fine sandpaper. Replace the cylinder body, if necessary.

Torque Member 

Check for wear, cracks, and damage. If damage or deformation is present, replace the affected part.

Piston 

CAUTION:
  • Since the piston surface is plated, do not repair using sandpaper.
  • Check piston surface for corrosion, wear, and damage. If any non-standard condition is detected, replace applicable part.
scientia non olet · About LEMON Manuals