LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2058 (Automatic Transmission) >> Trouble Diagnosis >> CONSULT-II Function (TRANSMISSION) >> Work Support Mode >> Work item

Work item

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
WORK ITEM

Work item Condition Usage
INITIALIZATION Under the following conditions.
  • Ignition switch "ON".
  • Selector lever "P" or "N" position.
  • Engine not running.
  • Vehicle speed is 0 km/h (0 MPH).
  • Ignition voltage is more than 10.5V.
  • Malfunction was not detected.
Use to initialize TCM in a case of replacing transaxle or TCM. Refer to "PRECAUTIONS FOR A/T ASSEMBLY OR TCM REPLACEMENT ".