LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Engine Mechanical) >> Exhaust Manifold And Three Way Catalyst >> Removal and Installation >> Installation >> Notes

Removal and Installation: Installation: Notes

WARNING: This page is about a different car, the 2004 Nissan Murano and 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal paying attention to the following.

CAUTION:
  • When using heated oxygen sensor wrench [SST: KV10114400 (J38365)], tighten to the middle of specified torque range, because the length of tool may increase the actual tightness. Do not tighten to the maximum specified torque range.
  • Before installing heated oxygen sensor, clean the threads on exhaust manifold using oxygen sensor thread cleaner tool (commercial service tool), and apply anti-seize lubricant.
  • Do not over-torque heated oxygen sensors. Doing so may cause damage to heated oxygen sensors.
scientia non olet · About LEMON Manuals