LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Brake System) >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cowl top and cowl top extension. Refer to "REMOVAL AND INSTALLATION ".
  2. Drain the brake fluid. Refer to "CHANGING BRAKE FLUID ".
  3. Remove the air cleaner to electric throttle control actuator tube attached to air cleaner case (upper). Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect the harness connector for the brake fluid level switch.
  5. Disconnect the master cylinder brake tubes and the hose from the reservoir tank to the sub tank using a suitable tool.
  6. Remove the master cylinder nuts and remove the master cylinder.
scientia non olet · About LEMON Manuals