LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1528 (Brake System) >> Rear Disc Brake >> Removal and Installation of Brake Pad >> Installation

Removal and Installation of Brake Pad: Installation

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push piston into cylinder body.
    NOTE: Using a commercially available disc brake piston tool, makes it easier to push in the piston.
    CAUTION: By pushing in piston, brake fluid returns to master cylinder reservoir tank. Watch the level of the surface of reservoir tank.
  2. Install pads to cylinder body making sure they are firmly attached.
  3. Rotate cylinder body up and install top mount bolt.
  4. Check brake for drag.
  5. Install wheel and tire assembly.
scientia non olet · About LEMON Manuals