Consult-II Diagnostic Test Mode Function
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT- II DIAGNOSTIC TEST MODE DESCRIPTION
| CONSULT- II DIAGNOSTIC TEST MODE | Description |
|---|---|
| C/U INITIALIZATION | When replacing any of the following three components, C/U initialization is necessary. [IVIS (NATS) ignition key/ BCM/ ECM] |
| SELF- DIAGNOSTIC RESULTS | Detected items (screen terms) are as shown in the chart. |
| PIN READ | Individual control unit number can be read. For future information, refer to operation manual NATS-IVIS/NVIS |
NOTE:
When any initialization is performed, all ID numbers previously registered will be erased and all ignition key or mechanical key must be registered again. The engine cannot be started with an unregistered key. The system will show "DIFFERENCE OF KEY" or "LOCK MODE" as a self-diagnostic result on the CONSULT-II screen.