LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Body, Lock & Security System) >> Hood >> Removal and Installation of Hood Lock Control >> Removal

Removal and Installation of Hood Lock Control: Removal

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grill. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the front fender protector (LH). Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect the hood lock cable from the hood lock, and clip it from the radiator core support upper and hood ledge.
  4. Remove instrument driver lower panel. Refer to "REMOVAL AND INSTALLATION ".
  5. After the bolt of the case with the air cleaner is disconnected, and it is moved, the cable is pulled.
  6. Remove the grommet on the dashboard, and pull the hood lock cable toward the passenger room.
CAUTION: While pulling, be careful not to damage (peeling) the outside of the hood lock cable.
scientia non olet · About LEMON Manuals