Removal and Installation: Inspection

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Inspect propeller shaft runout at measuring point. If runout exceeds specifications, replace propeller shaft assembly.
1. Propeller shaft runout limit: 0.6 mm (0.024 in) or less
Fig 1: Measuring Propeller Shaft Runout
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Propeller shaft runout measuring point
  1. Dimension A: 381.5 mm (15.01 in)
Fig 2: Identifying Propeller Shaft Runout Dimensions
Courtesy of NISSAN MOTOR CO., U.S.A.
As shown in the figure, while fixing yoke on one side, check axial play of joint. If outside the standard, replace propeller shaft assembly.
1. Journal axial play: 0 mm (0 in)
Check propeller shaft for bend and damage. If damage is detected, replace propeller shaft assembly.
CAUTION: Do not disassemble joints.

Fig 3: Checking Axial Play Of Joint
Courtesy of NISSAN MOTOR CO., U.S.A.