LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Drive Shaft >> Disassembly >> Support Bearing

Support Bearing

  1. Remove dust shield.
    Fig 1: Removing Dust Shield
    G01318944Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove snap ring.
    Fig 2: Removing Snap Ring - Support Bearing
    G01318945Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Press support bearing assembly off drive shaft.
    Fig 3: Pressing Support Bearing Assembly Off Drive Shaft
    G01318946Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove snap ring.
  5. Remove dust shield.
  6. Separate support bearing from retainer.
    Fig 4: Separating Support Bearing From Retainer
    G01318947Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals