LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs & Abs/TCS >> On Board Diagnostic System Description >> CONSULT-II Inspection Procedure >> Data Monitor Procedure

Data Monitor Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to Data Link Connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: CONSULT-II Display - Touch"START"
    G01333135Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: CONSULT-II Display - Touch"ABS"
    G01333136Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
    Fig 3: CONSULT-II Display - Touch"DATA MONITOR"
    G01333137Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals