LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 870 (Automatic Air Conditioner) >> In-Vehicle Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove lower driver instrument panel assembly. Refer to INSTRUMENT PANEL ASSEMBLY .
  2. Remove the in-vehicle sensor screw and then remove it.
    Fig 1: Removing In-Vehicle Sensor
    G01995758Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals