System Description: Function
WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- Through 50A fusible link (letter F , located in the fuse and fusible link block)
- To BCM terminal 55,
- Through 10A fuse [No. 18, located in the fuse block (J/B)]
- To BCM terminal 42,
- Through 10A fuse [No. 21, located in the fuse block (J/B)]
- To key switch terminal 2,
- Through 10A fuse [No. 19, located in the fuse block (J/B)]
- To combination meter terminal 21.
When ignition switch is in ON or START position, power is supplied
- Through 10A fuse [No. 1, located in the fuse block (J/B)]
- To BCM terminal 38,
- Through 10A fuse [No. 14, located in the fuse block (J/B)]
- To combination meter terminals 22 and 23.
Ground is supplied
- To BCM terminal 52
- Through grounds M30 and M66,
- To combination meter terminals 1, 24 and 25
- Through grounds M30 and M66.
NOTE:
When ignition key warning chime, light warning chime, and seat belt warning chime should be performed at the same time, the priorities for each chime are the following.
- Seat belt warning chime
- Light warning chime
- Ignition key warning chime