LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 1475 (Body, Lock & Security System) >> Trunk Lid >> Removal and Installation of Trunk Lid Assembly >> Installation

Removal and Installation of Trunk Lid Assembly: Installation

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

Install holder to trunk lid stay, and then push it into trunk lid hinge (stud ball) when installing trunk lid stay.

CAUTION:
  • Check trunk lid open/close operation after installation
  • Apply sealant and coat with the same body color paint to trunk lid hinge installation part and mounting bolts.
scientia non olet · About LEMON Manuals