Control Valve Assembly and Accumulators: Installation

Tighten mounting bolts A, B and C to specification .
: 7-9 N.m (0.7 - 0.9 kg-m, 61 - 78 in-lb)

Fig 1: Tightening Mounting Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.
Set manual shaft in Neutral position, then align manual plate with groove in manual valve.
After installing control valve assembly to transmission case, make sure that selector lever can be moved to all positions .

Fig 2: Aligning Manual Plate With Groove In Manual Valve
Courtesy of NISSAN MOTOR CO., U.S.A.