LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Pathfinder SE, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> DTC Control Unit (Ram), Control Unit (ROM) >> Description >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch "ON" and select "DATA MONITOR" mode for A/T with CONSULT-II.
    Fig 1: CONSULT-II (Select System Display)
    G02033047Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: CONSULT-II (Select Diag Mode)
    G02033048Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine.
  3. Run engine for at least 2 seconds at idle speed.
scientia non olet · About LEMON Manuals