System Description: Inputs
Power is supplied at all times
- to smart entrance control unit terminal 49 and
- to key switch terminal 2
- through 7.5A fuse [No. 24, located in the fuse block (J/B)], and
- to smart entrance control unit terminal 51
- through circuit breaker terminals 2 and 1 and
- through 40A fusible link (letter f , located in fuse and fusible link box).
When the key switch is ON (ignition key is inserted in key cylinder), power is supplied
- through key switch terminal 1
- to smart entrance control unit terminal 25.
When the front door switch LH is ON (door is OPEN), ground is supplied
- to smart entrance control unit terminal 1
- through front door switch LH terminal 1
- to front door switch LH terminal 2
- through body grounds B11, B22 and D210.
When the front door switch RH is ON (door is OPEN), ground is supplied
- to smart entrance control unit terminal 2
- through front door switch RH terminal 1
- to front door switch RH terminal 2
- through body grounds B55 and B75.
When the all doors switches are ON (door is OPEN), ground is supplied
- to smart entrance control unit terminal 3
- through front door switches terminal 3
- to front door switches case grounds, and
- through rear door switches terminal 1
- to rear door switches case grounds, and
- through back door switch terminal 2
- to back door switch terminal 1
- through body grounds B11, B22 and D210.
When lock/unlock switch LH is LOCK/UNLOCK, ground is supplied
- to power window main switch terminal 17
- through body grounds M4, M66, M111, M147 and M157.
Door lock or unlock operation signal is supplied
- through power window main switch terminal 14
- to smart entrance control unit terminal 33.
When lock/unlock switch RH is LOCK/UNLOCK, ground is supplied
- to front power window switch RH terminal 11
- through body grounds M4, M66, M111, M147 and M157.
Door lock or unlock operation signal is supplied
- through power window main switch terminal 14
- to smart entrance control unit terminal 33.
Remote controller signal is inputted to smart entrance control unit (The antenna of the system is combined with smart entrance control unit).
Smart entrance control unit is connected to power window main switch (door lock and unlock switch) and front power window switch RH (door lock and unlock switch) as serial link communication line. Refer to POWER WINDOW SERIAL LINK .