Check Key Fob Battery and Function: Notes

CHECK KEY FOB BATTERY
1. Remove key fob battery. Refer to KEY FOB BATTERY REPLACEMENT .
2. Check voltage between battery positive and negative terminals, (+) and (-).
  Voltage: 2.5V - 3.0V
NOTE: Key fob does not function if battery is not set correctly.

OK or NG
1. OK: GO TO 2.
2. NG: Replace battery.
  
  Fig 1: Checking Key Fob Battery
  Courtesy of NISSAN MOTOR CO., U.S.A.
CHECK KEY FOB FUNCTION
With CONSULT-II

Check key fob function in DATA MONITOR mode with CONSULT-II.

When pushing each button of key fob, the corresponding monitor item should be turned as follows.

Fig 2: Checking Key Fob Function In Data Monitor Mode With Consult-II (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking Key Fob Function In Data Monitor Mode With Consult-II (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK: Key fob is OK.
2. NG: Replace key fob.