LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Murano SE, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Fluid >> Replacement >> Filling

Transfer Fluid: Replacement: Filling

  1. Remove filler plug and add gear oil until oil level reaches the specified limit near filler plug mounting hole.
    Fig 1: Checking Oil Level
    G01199940Courtesy of NISSAN MOTOR CO., U.S.A.

    Oil capacity: Approx. 0.31 (5/8 US pt, 1/2 Imp pt) 

    CAUTION: Carefully fill the oil. (Fill up for approx. 3 minutes)
  2. Leave the vehicle for 3 minutes, and check the oil level again.
  3. Apply recommended sealant to filler plug. Position filler plug on transfer and tighten to the specified torque. Refer toCOMPONENT PARTS LOCATION .

    Drain plug tightening torque 

    : 9.8 - 19.6 N.m (1.0 - 1.9 kg-m, 87 - 173 in-lb) 

scientia non olet · About LEMON Manuals