Consult-II Diagnostic Test Mode Function
WARNING: This page is about a different car, the 2002 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When any initialization is performed, all IDs previously registered will be erased and all NVIS (NATS) ignition keys must be registered again. The engine cannot be started with an unregistered key. In this case, the system may show "DIFFERENCE OF KEY" or "LOCK MODE" as a self-diagnostic result on the CONSULT-II screen. In rare cases, "CHAIN OF ECM-IMMU" might be stored as a self-diagnostic result during key registration procedure, even if the system is not malfunctioning.
CONSULT-II DIAGNOSTIC TEST MODE FUNCTION
| Consult-II Diagnostic Test Mode | Description |
|---|---|
| C/U Initialization | When Replacing Any Of The Following 3 Components, C/U Initialization Is Necessary, [NVIS (NATS) Ignition Key/IMMU/ECM] |
| Self Diagnosis | Detected Items (Screen Terms) Are As Shown In HOW TO READ SELF-DIAGNOSTIC RESULTS . |