LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Maxima GLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P1217: Engine Over Temperature >> DTC Confirmation Test (Using CONSULT-II)

DTC Confirmation Test (Using CONSULT-II)

WARNING: Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator.
NOTE: Use the following test to check overall function of cooling fan. During this test, 1st trip DTC may not be confirmed.
  1. Allow engine to cool. Check coolant level in radiator and reservoir tank. If coolant level is okay, go to next step. If coolant level is low, go to DIAGNOSTIC PROCEDURE .
  2. If coolant was filled by customer, go to DIAGNOSTIC PROCEDURE . If coolant was not filled by customer, go to next step.
  3. Turn ignition on. Perform COOLING FAN in ACTIVE TEST mode with CONSULT-II. If cooling fan operates properly, system is okay at this time. If cooling fan does not operate properly, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals