LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Maxima GLE >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> On Board Diagnostic System Description >> CONSULT-II Inspection Procedure >> Data Monitor Procedure

Data Monitor Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: Consult-II Display Screen (Data Monitor Procedure)
    G02063597Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: Diagnosis System Selection Display Screen (Data Monitor Procedure)
    G02063598Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "START" on "SELECT MONITOR ITEM".
    Fig 3: Diagnosis Mode Selection Display Screen (Data Monitor Procedure)
    G02063599Courtesy of NISSAN MOTOR CO., U.S.A.


  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: Consult-II Display Screen (Data Monitor Procedure)
    G02063601Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: Diagnosis System Selection Display Screen (Data Monitor Procedure)
    G02063602Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "START" on "SELECT MONITOR ITEM".
    Fig 3: Diagnosis Mode Selection Display Screen (Data Monitor Procedure)
    G02063603Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals