Fuel Pressure Release: Notes

WARNING: This page is about a different car, the 2004 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON.
Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
Start engine.
After engine stalls, crank it two or three times to release all fuel pressure.
Turn ignition switch OFF.

Fig 1: Reading "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode

Courtesy of NISSAN MOTOR CO., U.S.A.