LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Altima SE, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System & Traction Control System - Abs/TCS >> Trouble Diagnosis >> CONSULT-II Function >> Data Monitor Procedure

Data Monitor Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
    Fig 1: Connecting CONSULT-II To Data Link Connector
    G02161650Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 2: Displaying CONSULT-II
    G02161651Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 3: Displaying Diagnosis System Selection
    G02161652Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
    Fig 4: Displaying Self-Diag Mode
    G02161653Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "LONG TIME" on "SET RECORDING COND" screen.
  9. Touch "START" on "SELECT MONITOR ITEM".
scientia non olet · About LEMON Manuals