LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Altima Base, 2.5 A, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> DTC Control Unit (Ram), Control Unit (ROM) >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode for A/T with CONSULT-II.
  2. Start engine.
    Fig 1: Consult-II Select System Screen
    G02160927Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Run engine for at least 2 seconds at idle speed.
    Fig 2: Consult-II Select Diag Mode Screen
    G02160928Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals