LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Altima Base, 2.5 A, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can System >> Can System (For A/T Models) >> Work Flow >> Notes

Work Flow: Notes

  1. Print all the data of "SELF-DIAG RESULTS" and "DATA MONITOR" for "ENGINE""A/T" and "BCM" displayed on CONSULT-II. Refer to CONSULT-II for "ENGINE" and CONSULT-II for "A/T". Refer to CONSULT-II for "BCM".
  2. Attach the printed sheet of "SELF-DIAG RESULTS" and "DATA MONITOR" onto the check sheet. Refer to "CHECK SHEET ".
  3. Based on the data monitor results, put check marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET ".
    NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.
  4. According to the check sheet results (example), start inspection. Refer to "CHECK SHEET RESULTS (EXAMPLE) ".
scientia non olet · About LEMON Manuals