LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> 350Z Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Abs >> Trouble Diagnosis >> CONSULT-II Functions >> Data Monitor >> Operation Procedure

Operation Procedure

  1. After turning OFF the ignition switch, connect CONSULT-II and the CONVERTER to the data link connector.
    CAUTION: If CONSULT-II Is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected In self-diagnosis depending on control unit which carry out CAN communication.
  2. Touch "START (NISSAN BASED VHCH)", "ABS/TCS", "DATA MONITOR" in order on the CONSULT-II screen.

    If "ABS" is not indicated, go to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT .

    CAUTION: When "START(NISSAN BASED VHCL)" is touched immediately after starting the engine or turning on the ignition switch, "ABS" might not be displayed in the system selection screen. In this case, repeat the operation from step 2.
  3. Return to the Monitor Item Selection screen, and touch "C/U INPUT ITEM", or "ITEM MENU SELECTION". Refer to the following information.
  4. When "START" is touched, the data monitor screen is displayed.
scientia non olet · About LEMON Manuals