System Description: Inputs
Power is supplied at all times
- to BCM terminal 7
- through 40A fusible link (letter F , located in the fuse and fusible link box).
- to key switch terminal 2
- through 10A fuse (No.21, located in the fuse and fusible link box).
When the ignition switch is ON, power is supplied
- to BCM terminal 35
- through 10A fuse [No.1. located in the fuse block (J/B)].
When the ignition switch is ACC, power is supplied
- to BCM terminal 36
- through 10A fuse [No. 6, located in the fuse block (J/B)].
When the driver side door switch is ON (door is OPEN), ground is supplied
- to BCM terminal 14
- through driver side door switch terminal 1
- to driver door switch case ground.
When the passenger side door switch is ON (door is OPEN), ground is supplied
- to BCM terminal 10
- through passenger side door switch terminal 1
- to passenger side door switch case ground.
When the back door switch is ON (door is OPEN), ground is supplied
- to BCM terminal 18
- through the back door switch terminal 1 and 3
- to body grounds B5,B6,D105 and T14.
When the key switch is ON (key is inserted in ignition key cylinder), power is supplied
- through key switch terminal 1
- to BCM terminal 1.
Key fob signal is inputted to BCM (the antenna of the system is combined with BCM).
The remote keyless entry system controls operation of the
- power door lock
- hazard and horn reminder
- auto door lock
- interior lamp and step lamp
- panic alarm
- back door opener
- keyless power window down (open).