LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Manual Transaxle RS6F51H) >> Final Drive >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove mounting bolts. Then, separate the final gear from differential case.
  2. Remove speedometer drive gear.
  3. Using a drift and puller, remove differential side bearing (clutch housing side).
    Fig 1: Pressing Differential Side Bearing Off (Clutch Housing Side)
    G02023300Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Using a drift and puller, remove differential side bearing (transaxle case side).
    Fig 2: Pressing Differential Side Bearing Off (Transaxle Case Side)
    G02023301Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals