LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2000 (Front Final Drive) >> Front Final Drive Assembly >> Disassembly and Assembly >> Disassembly >> Differential side shaft

Differential side shaft

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the differential gear oil if necessary.
  2. Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool.

    Tool number : KV10111100 (J-37228) 

    CAUTION:
    • Do not damage the mating surface.
    • Do not insert flat-bladed screwdriver, this will damage the mating surface.
      Fig 1: Locating Carrier Cover Bolts
      G04901835
  3. Remove side oil seal.
    CAUTION: Do not damage gear carrier.
    Fig 2: Identifying Side Oil Seal
    G04898695
  4. Remove snap ring (hole side) using suitable tool.
    Fig 3: Identifying Snap Ring (Hole Side)
    G04898696
  5. Remove differential side shaft assembly out of gear carrier using suitable tool.
    NOTE: Tap on differential side shaft assembly from side gear side.
    Fig 4: Identifying Differential Side Shaft Assembly
    G04898697
  6. Remove snap ring (differential side shaft side).
  7. Press differential side shaft out of differential side shaft bearing.
    CAUTION: Do not drop differential side shaft.
    Fig 5: Pressing Side Shaft Out Of Side Shaft Bearing
    G04898698
scientia non olet · About LEMON Manuals