LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Servicing A/T) >> Removal & Installation >> Park/Neutral Position Switch >> Removal

Park/Neutral Position Switch: Removal

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front exhaust pipe using the following steps:
    1. Disconnect 2 heated oxygen sensors.
    2. Remove 4 bolts, nuts and 2 gaskets from left and right TWC.
    3. Remove 2 bolts and support bracket.
    4. Remove 4 bolts and center floor crossmember brace.
    5. Remove front exhaust pipe. See Figure.
  2. Remove 4 bolts and heat insulator.
  3. Disconnect PNP switch connector.
  4. Remove PNP switch using the following steps:
    1. Remove nut and shift lever.
    2. Use screwdriver to pry off lock washer and remove nut.
    3. Remove bolt and pull out PNP switch. See Figure.
scientia non olet · About LEMON Manuals