LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1464 (Lighting System) >> Stop Lamp >> High-Mounted Stop Lamp (Coupe Models) >> Bulb Replacement, Removal And Installation

Bulb Replacement, Removal And Installation

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove back door finisher upper. Refer to "BACK DOOR FINISHER ".
  2. Disconnect high-mounted stop lamp connector.
  3. Remove nuts and remove high-mounted stop lamp with cover from back door. Be sure to pull toward the arrow in the figure.
  4. Remove screws and remove high-mounted stop lamp assembly from cover.
  5. Installation is the reverse order of removal.
    • High-mounted stop lamp: LED 
    Fig 1: Removing Screws Remove High-Mounted Stop Lamp Assembly
    G02405792Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals