Horn Reminder Check

CHECK HORN
Check if horn sounds with horn switch.

Does horn operate?
1. Yes : GO TO 2.
2. No : Check horn circuit.
CHECK HORN REMINDER OPERATION
With CONSULT-II
1. Select "ACTIVE TEST" in "MULTI REMOTE ENT" with CONSULT-II.
2. Select "MULTI REM HRN" and touch "ON".
  
  Fig 1: Selecting Multi Rem Hrn And Touch On
  Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE: If CONSULT-II is not available, skip this procedure and go to the next step.

OK or NG
1. OK : Horn reminder operation is OK.
2. NG : GO TO 3.
CHECK HORN REMINDER OPERATION
1. Disconnect smart entrance control unit harness connector.
2. Apply ground to smart entrance control unit harness connector terminal 19.
  
  Fig 2: Applying Ground To Smart Entrance Control Unit Harness Connector Terminal 19
  Courtesy of NISSAN MOTOR CO., U.S.A.
Refer to Figure and Figure .

Does horn sound?
1. Yes : Replace smart entrance control unit.
2. No : Check harness for open or short between smart entrance control unit and horn relay.