LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Engine Controls - System & Component Testing) >> Fuel Pump Circuit >> Diagnostic Procedure >> 2. Check Fuel Pump Power Supply Circuit-I

2. Check Fuel Pump Power Supply Circuit-I

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ECM harness connector.
  3. Turn ignition switch ON.
  4. Check voltage between ECM terminal 113 and ground with CONSULT-II or tester.
    1. Voltage: Battery voltage 

OK or NG 

  1. OK : GO TO 5 .
  2. NG : GO TO 3.
Fig 1: Check Fuel Pump Power Supply Circuit-I
G00875128Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals