LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2006 (Manual Air Conditioner) >> Intake Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front kick plate. Refer to "KICK PLATES ".
  2. Remove the lower dash side finisher. Refer to "LOWER DASH SIDE FINISHER ".
  3. Remove the front pillar lower finisher. Refer to "FRONT PILLAR LOWER FINISHER ".
  4. Remove the assist grip handle
  5. Remove the front pillar upper finisher. Refer to "FRONT PILLAR UPPER FINISHER ".
  6. Remove the lower glove box. Refer to "LOWER INSTRUMENT PANEL RH AND LOWER GLOVE BOX ".
  7. Remove the upper glove box (cluster lid E). Refer to "INSTRUMENT PANEL ASSEMBLY ".
  8. Disconnect the intake sensor electrical connector.
    NOTE: The intake sensor is located on the top of the heater and cooling unit assembly next to the A/C evaporator cover.
    Fig 1: Identifying Heater And Cooling Unit Assembly
    G04913671
  9. Twist the intake sensor to remove the intake sensor from the heater and cooling unit assembly.
scientia non olet · About LEMON Manuals