Engine unit
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
2AZ-FE ENGINE MECHANICAL ENGINE UNIT TORQUE SPECIFICATION
| Part Tightened | N.m | kgf.cm | ft. lbf | |
|---|---|---|---|---|
| Connecting rod cap x Connecting rod | 24.5 | 250 | 18 | |
| Crankshaft bearing cap x Cylinder block | 40 | 408 | 30 | |
| Stud bolt x Cylinder block | Bolt A (Bolt length = 84 mm (3.31 in.) | 5.0 | 51 | 44 48 in.lbf |
| Bolt B (Bolt length = 33.3 mm (1.31 in.) | 21.5 | 219 | 16 | |
| Bolt c (Bolt length = 52.5 mm (2.07 in.) | 5.0 | 51 | 44 48 in.lbf | |
| Bolt D (Bolt length = 27.5 mm (1.08 in.) | 9.5 | 97 | 84 48 in.lbf | |
| Crankshaft bearing cap x Cylinder block | 40 | 408 | 30 | |
| Balanceshaft housing x Stiffening crankcase assembly | 21.6 | 224 | 16 | |
| Stiffening crankcase assembly x Cylinder block | 32.5 | 331 | 24 | |
| No. 1 taper screw plug x Cylinder block | 26 | 265 | 19 | |
| Plug (oil control valve filter) x Cylinder block | 30 | 306 | 22 | |
| Water drain cock plug x Cylinder block | 25 | 255 | 18 | |
| Cylinder head subassembly x Cylinder block | 1 st | 78.5 | 800 | 58 |
| 2 nd | Turn 90° | Turn 90° | Turn 90° | |
| Camshaft timing oil control valve assembly x Cylinder head | 9.0 | 92 | 80 48 in.lbf | |
| Oil drain plug x Oil pan sub-assembly | 40 | 408 | 30 | |
| Oil filer union x Stiffening crankcase assembly | 29.5 | 301 | 22 | |
| Cylinder head cover sub-assembly x Cylinder head | Bolt A | 11 | 112 | 8 |
| Bolt B (ignition coil side) | 14 | 143 | 10 | |
| Ventilation valve sub-assembly x Cylinder head cover sub-assembly | 19 | 194 | 14 | |
| Oil filer cap sub-assembly x Cylinder head cover sub-assembly | 19 | 194 | 14 | |