Drain and Refill
WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Carefully monitor brake fluid level in reservoir tank during draining operation.
- Refill with new brake fluid "DOT3".
- Never reuse drained brake fluid.
- Do not let brake fluid splash on painted surfaces of body. This might damage the paint, when splashing it on the surfaces, immediately wipe off the m with cloth and wash it away with water.
- Turn ignition switch OFF and remove the battery cables.
- Connect a vinyl tube to bleed valve.
- Depress brake pedal, loosen bleed valve, and gradually remove brake fluid.
- Make sure there is no foreign material in the reservoir tank, and refill with new brake fluid.
- Rest foot on brake pedal. Loosen bleed valve. Slowly depress pedal until it stops. Tighten bleed valve. Release brake pedal. Repeat this process a few times, then pause to add new brake fluid to master cylinder. Continue until new brake fluid flows out. Bleed Air. Refer to "BLEEDING BRAKE SYSTEM ".