How to Change/ Reset Indication

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is turned to ON, modes of the trip computer can be selected by pressing trip computer mode switch. The switches for the trip computer are located on the right side of the combination meter. Indication can be changed in the following order by momentarily depressing the trip computer mode switch. Vehicle speed --> Ambient air temperature --> DTE --> Average fuel consumption and average vehicle speed --> Trip time and trip distance --> Stopwatch --> Tire pressure --> Shift-up indicator setting.

Fig 1: Trip Computer Mode Switch And Setting Switch

Courtesy of NISSAN MOTOR CO., U.S.A.

Holding the trip computer setting switch for more than 0.8 second will reset the indication of the currently displayed mode (Average fuel consumption, average vehicle speed, trip time, trip distance or stopwatch).

NOTE: When the AMBIENT AIR TEMPERATURE warning, TIRE PRESSURE warning and the DTE warning match warning conditions at the same time, the display automatically indicates the AMBIENT AIR TEMPERATURE.