LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1423 (Lighting System) >> Hazard Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove A/T console finisher. Refer to "REMOVAL " in Instrument Panel article.
  2. Disconnect hazard switch connector.
  3. Remove screws and remove ashtray assembly from A/T console finisher.
  4. Press pawl on reverse side and remove hazard switch.
    Fig 1: Removing Ashtray Assembly From A/T Console Finisher
    G02359241Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals