LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Automatic Transmission) >> Key Interlock Cable >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unlock slider by squeezing lock tabs on slider from adjuster holder.
  2. Remove casing cap from bracket of control device assembly and remove interlock rod from adjuster holder.
    Fig 1: Removing Casing Cap From Bracket
    G02362862Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove holder from key cylinder and remove key interlock cable.
    Fig 2: Removing Holder From Key Cylinder
    G02362863Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals