LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1034 (Engine Control System) >> On Board Diagnostic (OBD) System >> Malfunction Indicator Lamp (Mil) >> How To Switch Diagnostic Test Mode >> How To Erase Diagnostic Test Mode II (Self-Diagnostic Results)

How To Erase Diagnostic Test Mode II (Self-Diagnostic Results)

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set ECM in Diagnostic Test Mode II (Self-diagnostic results). Refer to HOW TO SET DIAGNOSTIC TEST MODE II (SELF-DIAGNOSTIC RESULTS)  .
  2. Fully depress the accelerator pedal and keep it for more than 10 seconds.

    The emission-related diagnostic information has been erased from the backup memory in the ECM.

  3. Fully release the accelerator pedal, and confirm the DTC 0000 is displayed.
scientia non olet · About LEMON Manuals