LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 828 (Brake Control System) >> Abs >> Trouble Diagnosis >> Basic Inspection >> Basic Inspection 3 ABS Warning Lamp Inspection

Basic Inspection 3 ABS Warning Lamp Inspection

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that ABS warning lamp turned on approximately 2 second when ignition switch is turned ON Check CAN communications. Refer to INSPECTION 4 CAN COMMUNICATION LINES . If there are no errors with CAN communication system, check ABS warning lamp and combination meter. Refer to COMBINATION METERS .
  2. Check that ABS warning lamp turned OFF approximately 2 second after ignition switch is turned on. If ABS warning lamp does not turn OFF, perform self- diagnosis.
  3. Check that ABS warning lamp turns OFF 2 seconds after engine is started. If ABS warning lamp has not turned OFF 10 seconds after engine has been started, perform self-diagnosis of ABS actuator and electric unit (control unit).
  4. After performing self-diagnosis, be sure to erase the error memory. Refer to CONSULT-II FUNCTIONS .
scientia non olet · About LEMON Manuals