LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Power Seat System) >> Automatic Drive Positioner >> Mirror Sensor RH Circuit Check >> 4. Check Harness Continuity 2

4. Check Harness Continuity 2

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check continuity between automatic drive positioner control unit connector M33 terminal 5, 21 and door mirror RH connector D107 terminal 7, 8.

    5 (R/B) - 7 (R/B) : Continuity should exist. 

    21 (L/W) - 8 (L/W) : Continuity should exist. 

  2. Check continuity between automatic drive positioner control unit connector M33 terminal 5, 21 and ground.

    5 (R/B) - Ground : Continuity should not exist. 

    21 (L/W) - Ground : Continuity should not exist. 

Fig 1: Checking Continuity
G00342344Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

  1. OK >> Replace door mirror RH.
  2. NG >> Repair or replace harness.
scientia non olet · About LEMON Manuals