Inspection After Disassembly

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Case

Check the contact surfaces of the shift rod and bearing for wear and damage. If any is found, replace with a new one.

Fig 1: Checking Contact Surfaces Of Shift Rod And Bearing For Wear And Damage

Sleeve

Check the items below. If necessary, replace them with new ones.

Damage and excessive wear of the contact surfaces of the sprocket, mainshaft and sleeve.
Sleeve must move smoothly.

Fig 2: Checking Damage And Excessive Wear Of Contact Surfaces Of Sprocket, Mainshaft And Sleeve

Gear, Shaft and Drive Chain

Check the items below. If necessary, replace them with new ones.

Damage, peeling, uneven wear and bending of the shaft.
Excessive wear, damage and peeling of the gear.

Fig 3: Checking Excessive Wear, Damage And Peeling Of Gear

Bearing

Check the bearing for damage and rough rotation. If necessary, replace it with a new one.

Fig 4: Checking Bearing For Damage And Rough Rotation