LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 2117 (Automatic Transmission) >> DTC U1000 Can Communication Line >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION CIRCUIT 

    With CONSULT-III 

    1. Turn ignition switch "ON" and start engine.
    2. Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with in CONSULT-III.

    Is any malfunction of the "CAN COMM CIRCUIT" indicated? 

    YES: Print out CONSULT-III screen, GO TO "CAN SYSTEM SPECIFICATION CHART ".

    NO: INSPECTION END 

scientia non olet · About LEMON Manuals