LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 2111 (Engine Mechanical) >> Rocker Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover using power tool.
  2. If removing rocker cover (RH), disconnect the mass air flow sensor electrical connector and remove the air cleaner to electric throttle control actuator tube and air cleaner lid. Refer to "REMOVAL AND INSTALLATION ".
  3. If removing rocker cover (Rh), remove the front cowl panel. Refer to "REMOVAL AND INSTALLATION ".
  4. If removing rocker cover (RH), remove the windshield wiper arms and motor assembly. Refer to "WIPER MOTOR AND LINKAGE ".
  5. If removing rocker cover (RH), remove the intake manifold collector. Refer to "REMOVAL AND INSTALLATION ".
  6. If removing rocker cover (LH), disconnect the air fuel ratio (A/F) sensor.
  7. Remove the ignition coils. Refer to "REMOVAL AND INSTALLATION ".
  8. Position engine harness aside.
  9. Disconnect PCV hoses.
  10. Remove the engine oil dipstick.
  11. Remove rocker covers bolts in the order as shown.
    Fig 1: Engine Cover With Torque Specification
    G04904578Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals