LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 2111 (Engine Mechanical) >> Cylinder Block >> How to Select Piston and Bearing >> How To Select A Piston >> Piston Selection Table

Piston Selection Table

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER INNER AND OUTER DIAMETER REFERENCE

Unit: mm (in)
Grade 1 2 (or no mark) 3
Inner diameter of cylinder bore 95.500 - 95.510 (3.7598 - 3.7602) 95.510 - 95.520 (3.7602 - 3.7606 95.520 - 95.530 (3.7606 - 3.7610)
Outer diameter of piston 95.480 - 95.490 (3.7590 - 3.7594) 95.490 - 95.500 (3.7594 - 3.7598) 95.500 - 95.510 (3.7598 - 3.7602)
NOTE:
  • The piston is available together with piston pin as an assembly.
  • The piston pin (piston pin bore) grade is provided only for the parts installed at the plant. For service parts, no piston pin grades can be selected. (Only 0 grade is available.)
  • No grade mark is indicated on 2 grade piston.
scientia non olet · About LEMON Manuals