LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 1988 (Front Final Drive) >> Carrier Cover >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply 3 mm (0.12 in) bead of sealant to the mating surface of the carrier cover as shown.
    CAUTION: Remove any old sealant adhering to the mating surfaces. Also remove any moisture, oil, or foreign material adhering to the application and mating surfaces.
  2. Install the carrier cover to the gear carrier. Tighten the bolts to the specified torque. Refer to "COMPONENTS ".
    Fig 1: Applying Bead Of Sealant To Mating Surface Of Carrier Cover
    G04756652
  3. Install the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
    CAUTION: Fill the front final drive assembly with recommended differential gear oil. Refer to "DIFFERENTIAL GEAR OIL ".
scientia non olet · About LEMON Manuals