Removal and Installation: Installation
WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal. When installing wheel and tire, Refer to "ROTATION ".
CAUTION:
- Inspect wheel sensor O-ring, replace sensor assembly if damaged.
- Clean wheel sensor hole and mounting surface with brake cleaner and a lint-free shop rag. Be careful that dirt and debris do not enter the axle.
NOTE:
- Apply a coat of suitable grease to the wheel sensor O-ring and mounting hole.
- Tighten wheel sensor bolt to specification.