Removal and Installation of Brake Caliper Assembly: Installation
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Refill with new brake fluid"DOT 3".
- Do not reuse drained brake fluid.
- Install disc rotor.
- Install caliper assembly to the vehicle, and tighten bolts to the specified torque.CAUTION: Before installing caliper assembly to the vehicle, wipe off oil and grease on washer seats on axle assembly and mounting surface of caliper assembly.
- Install brake hose to caliper assembly and tighten union bolt to the specified torque.CAUTION:
- Do not reuse copper washer for union bolt.
- Securely attach brake hose to protrusion on caliper assembly.
- Refill new brake fluid and bleed air. Refer to "BLEEDING BRAKE SYSTEM ".
- Install tires to the vehicle.